Download Brochures | The Concept | Comparison Chart | Brush Colors | Specifications | Contact PDQ
DOWNLOAD BROCHURES
Before you can download the requested information, we would like to know a little more about you. Please fill out the form below.
THE TANDEM CONCEPT
- Obstacle-free entry and exit
- Tandem system locates vehicle positioning using sensors
- Overhead design keeps floor open and unobstructed
|
 |
- Foaming detergent loosens dirt
- High pressure removes heavy soils
- Light touch brushes gently clean
|

|
- Tandem overhead bridges provide faster wash processes
- Over 20 valuable services to offer customers
|
COMPARISON CHART
| Customer Services Available |
Tandem 210
|
Tandem 310
|
Tandem 310 + Stand-Alone Dryer
|
| Under Body Spray |
|
|
|
| Under Body Rust Inhibitor |
|
|
|
| Drive-In Side Blasting |
|
|
|
| Wheel Chemical Application |
|
|
|
| Wheel Brush Scrubbing |
|
|
|
| Wheel High Pressure Blasting |
|
|
|
| Vehicle Front Presoak Application |
|
|
|
| Presoak Detergent Application |
|
|
|
| High Pressure Top Blasting |
|
|
|
| High Pressure Side Blasting |
|
|
|
| Top Brush Contouring Pass |
|
|
|
| Extra Top Brush Pass |
|
|
|
| Side Brush Contouring Pass |
|
|
|
| Extra Side Brush Pass |
|
|
|
| Tri-Colored Foam Application |
|
|
|
| Super Sealant Application |
|
|
|
| Sealer Wax Application |
|
|
|
| Drying Agent Application |
|
|
|
| Soft Water Rinse |
|
|
|
| FlashDry® |
|
|
|
| 3 Nozzle Full Dryer Pass |
|
|
|
| 4 Nozzle Full Dryer Pass |
|
|
|
| Drive-Out Dryer |
|
|
|
Feature Available
BRUSH COLORS
SPECIFICATIONS
| |
Tandem 310
|
Tandem 310 with 2.65m Vehicle Clearance Option
|
| Specifications |
(Width x Length x Height)
|
(Width x Length x Height)
|
| Preferred Bay Dimensions |
4.88m x 10.97m x 3.35m
|
4.88m x 10.97m x 3.60m
|
| Maximum Vehicle Dimensions in Preferred Bay |
2.82m x 6.78m x 2.40m
|
2.82m x 6.78m x 2.65m
|
| Minimum Bay Dimensions |
4.11m x 9.14m x 3.20m
|
4.11m x 9.14m x 3,45m
|
| Maximum Vehicle Dimensions in Minimum Bay |
2.06m x 5.26m x 2.40m
|
2.06m x 5.26m x 2.65m
|
Note: The dimensions above apply to Tandem with an on-board dryer. If a stand-alone dryer is installed inside the bay, length must be added to accommodate the dryer. The minimum bay assumes that the rail length has been cut down 152.4cm as allowed by the installation process.
CONTACT PDQ

|
HEADQUARTERS
PDQ Manufacturing Inc.
1698 Scheuring Road
P.O. Box 5190
De Pere, Wisconsin 54115-5190
United States of America
Office: +1 920-983-8333
Fax: +1 920-983-8330
|
Information Request Form (you will be directed to PDQ's main website)
Want more information on one of our products? Use this link to contact PDQ for more information regarding one or more of our products or services. Product literature or other information will be sent at your request.
|
© 2010 PDQ Manufacturing, Inc. • 1698 Scheuring Road, De Pere, WI 54115 • +1-920-983-8333
Your IP: 38.107.191.85 Privacy Policy
|